Eagle -To- Polar GRS500 Output Processor ULP Script
Author: Polar Instruments Ltd.
Homepage: http://www.polarinstruments.com
Version: 1.0.2
Date: 19/03/2003
==================================================

Description
-----------

The Eagle To Polar GRS500 Output Processor ULP Script is used to convert Eagle board files (*.brd)
to a format (*.egr) that is readable by the Polar GRS500 Test System.

Usage
-----

1. Run the Eagle Software with a board design file open.

2. Under the 'File' Menu, select 'Run...'

3. Browse and open the ULP script, 'EagleToGRS.ulp', another dialog will appear asking for the 
   filename and location to store the converted file.  Apply these to your specification or leave
   the defaults.  Click 'Save'.  The Script will run taking anything from a few seconds to a
   couple of minutes depending on the size of the board design.

4. Conversion will be complete when the message, 'Run: Finished' appears in the status bar.

5. Run Polar GRS500 software.  Select under the 'File' menu:

   'Read CAD Netlist' -----> 'Read Eagle' -----> 'Eagle GRS500 Export File'

   Select the file that was output from the script (i.e. filename.egr)



DISCLAIMER

THIS ULP PROVIDED FOR GENERATING OUTPUTS ONLY FOR USE IN POLAR INSTRUMENTS
REPAIR TEST EQUIPMENT AND SOFTWARE.

POLAR MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING WITHOUT 
LIMITATION ANY REPRESENTATION OR WARRANTY AS TO THE SOFTWARE'S MERCHANTABILITY,
FITNESS FOR ANY INTENDED USE, OR NON-INFRINGEMENT OF THIRD PARTY RIGHTS. POLAR
EXPRESSLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY,
VERACITY, COMPLETENESS OR AVAILABILITY OF THE OUTPUT OF THE SOFTWARE. POLAR 
SPECIFICALLY DOES NOT WARRANT THAT THE SOFTWARE IS FREE FROM DEFECTS.







