#!/usr/bin/env bash

# This file is part of The RetroPie Project
#
# The RetroPie Project is the legal property of its developers, whose names are
# too numerous to list here. Please refer to the COPYRIGHT.md file distributed with this source.
#
# See the LICENSE.md file at the top-level directory of this distribution and
# at https://raw.githubusercontent.com/RetroPie/RetroPie-Setup/master/LICENSE.md
#

function onstart_mupen64plus_joystick() {
    # write temp file header
    echo "; ${DEVICE_NAME}_START " > /tmp/mp64tempconfig.cfg
    echo "[${DEVICE_NAME}]" >> /tmp/mp64tempconfig.cfg
    iniConfig " = " "" "/tmp/mp64tempconfig.cfg"
    iniSet "plugged" "True"
    iniSet "plugin" "2"
    iniSet "mouse" "False"
    iniSet "AnalogDeadzone" "4096,4096"
    iniSet "AnalogPeak" "32768,32768"
    iniSet "Mempak switch" ""
    iniSet "Rumblepak switch" ""
}

function map_mupen64plus_joystick() {
    local input_name="$1"
    local input_type="$2"
    local input_id="$3"
    local input_value="$4"

    local keys
    local dir
    case "$input_name" in
        up)
            keys=("DPad U")
            dir=("Up")
            ;;
        down)
            keys=("DPad D")
            dir=("Down")
            ;;
        left)
            keys=("DPad L")
            dir=("Left")
            ;;
        right)
            keys=("DPad R")
            dir=("Right")
            ;;
        b)
            keys=("A Button")
            ;;
        y)
            keys=("B Button")
            ;;
        a)
            keys=("C Button D")
            ;;
        x)
            keys=("C Button U")
            ;;
        leftbottom|leftshoulder)
            keys=("L Trig")
            ;;
        rightbottom|rightshoulder)
            keys=("R Trig")
            ;;
        lefttop|lefttrigger)
            keys=("Z Trig")
            ;;
        start)
            keys=("Start")
            ;;
        leftanalogleft)
            keys=("X Axis")
            dir=("Left")
            ;;
        leftanalogright)
            keys=("X Axis")
            dir=("Right")
            ;;
        leftanalogup)
            keys=("Y Axis")
            dir=("Up")
            ;;
        leftanalogdown)
            keys=("Y Axis")
            dir=("Down")
            ;;
        rightanalogleft)
            keys=("C Button L")
            dir=("Left")
            ;;
        rightanalogright)
            keys=("C Button R")
            dir=("Right")
            ;;
        rightanalogup)
            keys=("C Button U")
            dir=("Up")
            ;;
        rightanalogdown)
            keys=("C Button D")
            dir=("Down")
            ;;
        leftthumb)
            keys=("Mempak switch")
            ;;
        rightthumb)
            keys=("Rumblepak switch")
            ;;
        *)
            return
            ;;
    esac

    local key
    local value
    #iniConfig " = " "" "/tmp/mp64keys.cfg"
    for key in "${keys[@]}"; do
        # read key value. Axis takes two key/axis values.
        iniGet "$key"
        case "$input_type" in
            axis)
                # key "X/Y Axis" needs different button naming
                if [[ "$key" == *Axis* ]]; then
                    # if there is already a "-" axis add "+" axis value
                    if   [[ "$ini_value" == *\(* ]]; then
                        value="${ini_value}${input_id}+)"
                    # if there is already a "+" axis add "-" axis value
                    elif [[ "$ini_value" == *\)* ]]; then
                        value="axis(${input_id}-,${ini_value}"
                    # if there is no ini_value add "+" axis value
                    elif [[ "$input_value" == "1" ]]; then
                        value="${input_id}+)"
                    else
                        value="axis(${input_id}-,"
                    fi
                elif [[ "$input_value" == "1" ]]; then
                    value="axis(${input_id}+) ${ini_value}"
                else
                    value="axis(${input_id}-) ${ini_value}"
                fi
                ;;
            hat)
                if [[ "$key" == *Axis* ]]; then
                    if   [[ "$ini_value" == *\(* ]]; then
                        value="${ini_value}${dir})"
                    elif [[ "$ini_value" == *\)* ]]; then
                        value="hat(${input_id} ${dir} ${ini_value}"
                    elif [[ "$dir" == "Up" || "$dir" == "Left" ]]; then
                        value="hat(${input_id} ${dir} "
                    elif [[ "$dir" == "Right" || "$dir" == "Down" ]]; then
                        value="${dir})"
                    fi
                else
                    if [[ -n "$dir" ]]; then
                        value="hat(${input_id} ${dir}) ${ini_value}"
                    fi
                fi
                ;;
            *)
                if [[ "$key" == *Axis* ]]; then
                    if   [[ "$ini_value" == *\(* ]]; then
                        value="${ini_value}${input_id})"
                    elif [[ "$ini_value" == *\)* ]]; then
                        value="button(${input_id},${ini_value}"
                    elif [[ "$dir" == "Up" || "$dir" == "Left" ]]; then
                        value="button(${input_id},"
                    elif [[ "$dir" == "Right" || "$dir" == "Down" ]]; then
                        value="${input_id})"
                    fi
                else
                    value="button(${input_id}) ${ini_value}"
                fi
                ;;
        esac

        iniSet "$key" "$value"
    done
}

function onend_mupen64plus_joystick() {
    local bind
    local axis
    local axis_neg
    local axis_pos
    for axis in "X Axis" "Y Axis"; do
        if [[ "$axis" == *X* ]]; then
            axis_neg="DPad L"
            axis_pos="DPad R"
        else
            axis_neg="DPad U"
            axis_pos="DPad D"
        fi

        # analog stick sanity check
        # replace Axis values with DPAD values if there is no Axis
        # device setup
        if ! grep -q "$axis" /tmp/mp64tempconfig.cfg ; then
            iniGet "${axis_neg}"
            bind=${ini_value//)/,}
            iniGet "${axis_pos}"
            ini_value=${ini_value//axis(/}
            ini_value=${ini_value//hat(/}
            ini_value=${ini_value//button(/}
            bind="${bind}${ini_value}"
            iniSet "$axis" "$bind"
            iniDel "${axis_neg}"
            iniDel "${axis_pos}"
        fi
    done

    # If there is no Z Trig try to map the L shoulder
    # button to it via copying over the existing L Trig
    # value and deleting it (L Trig) after
    if ! grep -q "Z Trig" /tmp/mp64tempconfig.cfg ; then
        iniGet "L Trig"
        iniSet "Z Trig" "${ini_value}"
        iniDel "L Trig"
    fi

    echo "; ${DEVICE_NAME}_END " >> /tmp/mp64tempconfig.cfg
    echo "" >> /tmp/mp64tempconfig.cfg

    # abort if old device config cannot be deleted.
    # keep original mupen64plus-input-sdl configs.
    local file="$configdir/n64/InputAutoCfg.ini"
    if [[ -f "$file" ]]; then
        # backup current config file
        cp "$file" "${file}.bak"
        sed -i /"${DEVICE_NAME}_START"/,/"${DEVICE_NAME}_END"/d "$file"
        if grep -q "$DEVICE_NAME" "$file" ; then
            rm /tmp/mp64tempconfig.cfg
            return
        fi
    else
        cat > "$file" << _EOF_
; InputAutoCfg.ini for Mupen64Plus SDL Input plugin

; Keyboard_START
[Keyboard]
plugged = True
plugin = 2
mouse = False
DPad R = key(100)
DPad L = key(97)
DPad D = key(115)
DPad U = key(119)
Start = key(13)
Z Trig = key(122)
B Button = key(306)
A Button = key(304)
C Button R = key(108)
C Button L = key(106)
C Button D = key(107)
C Button U = key(105)
R Trig = key(99)
L Trig = key(120)
Mempak switch = key(44)
Rumblepak switch = key(46)
X Axis = key(276,275)
Y Axis = key(273,274)
; Keyboard_END

_EOF_
    fi

    # append temp device configuration to InputAutoCfg.ini
    cat /tmp/mp64tempconfig.cfg >> "$file"
    rm /tmp/mp64tempconfig.cfg
}